Classic design, high performance

Highly efficient patented rim extraction

Planed and easy to clean underside with covered filters

Air extraction or air recirculation system

Dimmable Soft-Light

Performance and noise level, output level 3/Intensive: Air output according to EN 61591. Sound power level according to EN 60704-3. Sound pressure level according to EN 60704-2-13. Odour reduction for air recirculation in accordance with EN 61591.

Air extraction: 580 / 800 m³/h. 59 / 70 dB (A) re 1 pW. 45 / 56 dB (A) re 20 μPa.

Air recirculation: 420 / 490 m³/h. 71 / 75 dB (A) re 1 pW. 57 / 61 dB (A) re 20 μPa.

3 electronically controlled power levels.

Intensive mode.

Interval ventilation.

Run-on function.

Grease filter saturation indicator.

Rim extraction filter, dishwasher-safe.

Dimmable halogen Soft-Light 3 x 20 W.

Glass cover.

For calculating the exhaust air line go to Rodun online at www.gaggenau.com.

For maximum exhaust air line use Gaggenau flat duct system AD 8… or Naber-System Compair flow. Other flat ducts are not permitted!

When installing a ventilation hood with air extraction mode and a chimney-vented fireplace, the power supply line of the ventilation appliance needs a suitable safety switch.

A large drop in output and significantly increased noise can be expected in the air recirculation mode in the case of ventilation hoods with a very high air output.

Vario cooktops with intensive production of vapours like VR/VP/VF should be placed in the middle beneath the hood (in this case air recirculation is not recommended).

Clearance above gas appliances min. 70 cm.

Clearance above electric appliances min. 60 cm.

Side outlet no lower than 55 cm from the bottom edge of the hood (middle of pipe).

Fit the socket concealed behind ventilation duct.

Recommendation for stainless steel parts positioned nearby that have to be welded and polished: brushed grain 280.

Surfaces: Stainless steel 1.4016, ground and brushed IIIC.

The dimensions of the air ducts refer to a distance of 1.60 m from the floor to the bottom edge of the hood. Convert for other installation heights: Worktop height + minimum clearance + hood with duct.