Discreet integration into the architecture of the kitchen

Energy-saving, low-noise fan

Rim extraction

Planed and easy to clean underside

Performance and noise level, output level 3/Intensive: Air output according to EN 61591. Sound power level according to EN 60704-3. Sound pressure level according to EN 60704-2-13. Odour reduction for air recirculation in accordance with EN 61591.

Air extraction: 570 / 780 m³/h. 64 / 71 dB (A) re 1 pW. 50 / 57 dB (A) re 20 μPa.

Air recirculation: 500 / 570 m³/h. 65 / 72 dB (A) re 1 pW. 51 / 58 dB (A) re 20 μPa.

3 electronically controlled power levels and 1 intensive mode.

Remote control is included in delivery.

Interval ventilation, 10 min.

Run-on function, 10 min.

Grease filter saturation indicator.

Metal grease filter, dishwasher-safe.

Stainless steel filter cover.

Lamp output 4 x LED 2,5W.

Illuminance 673 lx.

Fan technology with highly efficient, brushless DC motor (BLDC).

Turnable blower, air outlet on all four sides possible.

Connecting pipe DW 150 round.

Energy efficiency class A at a range of energy efficiency classes from A++ to E.

Energy consumption 58.2 kWh/year.

Ventilation efficiency class A.

Ilumination efficiency class A.

Grease filter efficiency class E.

Sound level min. 49 dB / max. 64 dB normal mode.

For installation in suspended ceiling.

A suitable load-bearing substructure is required for securing the extractor hood. Never fit the appliance directly onto plasterboard or similar lightweight construction materials.

Recommended minimum gap between appliance and external filter module:100 cm.

For air recirculation an external filter module is required.

Clearance above gas appliances min. 65 cm (more than total load gas 12 kW min. 70 cm).

Clearance above electric appliances min. 55 cm.

Maximum clearance above cooktops 150 cm.

The capture of vapours will be inefficient if the ceiling ventilation is positioned too high.

The cooktop should be no wider than the ceiling ventilation.

To achieve optimum vapour extraction, the ceiling ventilation must at least cover the hob. It should be positioned centrally over the hob. It cannot be combined with VF, VR, VP.

Please ensure when installing the exhaust air ducting that no sharp bends are caused and that the cross-section of the ducting is not constricted in any way.

When installing a ventilation hood with air extraction mode and a chimney-vented fireplace, the power supply line of the ventilation appliance needs a suitable safety switch.

Appliance weight: approx. 15.